How to use; 20mm snap topical spray pump, 170mcl?

There are many devices like 20mm snap topical spray pump, 170mcl which provide quick health support. And, do you know how to use them? This article shows which devices for nasal application are on the market, teaches how to use them; including how to sanitize them.

INDEX overview of 20mm snap topical spray pump, 170mcl

1. Nasal Wash Syringe

1.1. technique of use

2. Bottle with Dropper

3.In addition, drip bottle

4. Also, nasal spray pump
5. Nasal spray (continuous jet)
6. To Supplement the Content
7. First, nasal Wash Syringe
8. Second, syringe
9. Lastly, technique of use

1.Wash your hands

2. Separate the materials to be common for 20mm snap topical spray pump, 170mcl

Needleless syringe (volume between 3 and 20 ml) is good for spray pump. 0.9% saline solution is utilized for 20mm snap topical spray pump, 170mcl. Place, in a clean container, an amount of solution sufficient for the procedure in both nostrils. Never aspirate liquid directly from the bottle. Use slightly warmed saline solution to reduce discomfort.

4. Close the serum bottle; 20mm snap topical spray pump, 170mcl
5. Fill the syringe with saline
6. Slowly blow your nose to clear the nostrils before application
7. Position the head slightly back, so that the neck is hyperextended

Sit down and tilt your head back, or apart from this you can lie down with a pillow under your shoulders

8. Bring the syringe tip closer to the nostril, without touching it.

9.Apply 20mm snap topical spray pump, 170mcl gradually

10.Slightly tilt your head to the opposite side to which the drug was applied

11. And remain in this position for 2 min or more

12.Repeat the technique in the other nostril

13.Discard the rest of the serum

It refers to Illustration of how to use the syringe with saline solution for nasal lavage.

14. Nasal wash-syringe

How to sanitize the syringe after use?

Pour filtered or boiled water into a glass. Insert the syringe into the cup in an upright position. Press it to allow the syringe to empty into the sink. Repeat the process several times.

 Bottle with Dropper

1.Wash your hands

2.Slowly blow your nose to clear the nostrils before application. Position the head slightly back, so that the neck is hyperextended.

4.Fill the dropper; of 20mm snap topical spray pump, 170mcl

5. Bring the tip of the dropper close to the nostril, without touching it

6.Also, apply the required amount of drops

7.Slightly tilt your head to the opposite side to which the medicine was applied

8. And remain in this position for two minutes or more

8.Repeat the procedure in the other nostril

9.If necessary, before storing the bottle, clean the nozzle with a tissue.

10. The direction of cleaning movement should be from the nozzle to the base of the bottle
11. Moreover, it is to reduce the risk of contamination of the solution

12.Close the bottle after use.

How to Sanitize the Dropper?

Dropper Pour filtered or boiled water into a glass. Insert the dropper into the cup in an upright position. Squeeze the bulb and then reduce the pressure to allow it to fill. Press 20mm snap topical spray pump, 170mcl to allow the dropper to empty into the sink. Repeat the process several times. This recommendation is intended to prevent contamination of the solution with nasal secretion.

 Working of drip bottle; 20mm snap topical spray pump, 170mcl

1.Wash your hands

2.Slowly blow your nose to clear the nostrils before application

3. Dripper3. Position the head slightly back, so that the neck is hyperextended

4.Pressing a nostril with your index finger

5. In the other nostril, keep the bottle in a vertical position (at a 90º angle)
6.  Gently placing its tip at the entrance of the nostril
7. It is directed towards the external wall, not the nasal septum
8. Apart from this, compress the bottle; then, bend your head forward, inhaling
9. Repeat the procedure for the other nostril

Prerequisite for 20mm snap topical spray pump, 170mcl

If necessary, before storing the bottle (20mm snap topical spray pump, 170mcl), clean the spout with a tissue. And the direction of the cleaning movement must be from the nozzle to the base of the bottle, to reduce the risk of contamination of the solution. Also, do not wash with water to reduce the risk of contamination of the solution.

Close the bottle of spray after use

1. First, nasal spray pump
2. Second, nasal spray
3. Moreover, to learn how to use the nasal spray pump, watch the video below

• First, video player
• Second,00:00
• Moreover, 01:16

4. Also, video/Reproduction: YouTube Ache Laboratory
5. Lastly, nasal spray (continuous jet)

Steps for 20mm snap topical spray pump, 170mcl usage

1.First, wash your hands

2. Second, slowly blow your nose to clear the nostrils before application
3. In addition, tilt your head slightly forward or keep it upright

4.Additionaly, pressing a nostril with your index finger

5.And, in the other nostril, keep the bottle (20mm snap topical spray pump, 170mcl) in vertical position (at a 90º angle)

6. Also, placing its tip gently at the entrance of the nostril, facing the external wall, and not the nasal septum

7.Moreover, with the index finger, press the valve base, keeping it for the time necessary for hygiene

8. Furthermore, repeat the procedure for the other nostril

9.Lastly, it covers the bottle, after hygiene

How to use 20mm snap topical spray pump, 170mcl for babies

In babies, the spray application time should be short

1. First, nasal-spray-continuous-jet

How to sanitize the nasal spray

Firstly, for bottles that contain a removable applicator nozzle: gently pull the applicator nozzle out of the bottle. Secondly, wash the applicator (20mm snap topical spray pump, 170mcl) nozzle and protective cap with filtered or boiled water and mild soap.

In addition, it allows to dry completely in the open air, on a paper towel or napkin. This recommendation is intended to prevent contamination of the solution with nasal secretion. Never remove the valve.

1. How does an asthma pump work?

Secondly, it is a metered-dose inhaler or spray. Moreover this, when activated, releases a small dose of the medication stored inside. Furthermore, the substance is suspended or dissolved in a propellant gas.

2. What types of firecrackers are there?

Firstly, firecrackers are classified into two major groups: maintenance, for treatments, and relief. Secondly, the first does not use bronchodilator medications, combats bronchial inflammation. In addition, it helps reduce the need for the relief pump. Lastly, the second contains medications, being indicated only for immediate relief in cases of asthma attacks.

3. How to use an asthma pump?

For the application of 20mm snap topical spray pump, 170mcl to be efficient. Moreover, it is first necessary to shake to homogenize the medicine and allow the dose to be inhaled evenly. Additionally, the spray canister should be slightly apart. Furthermore, the person needs to keep their mouth open to trigger the medication and inhale.

Summary

In addition, the pump can also be powdered. In this case, it is necessary to place the mouth on the device, sucking the medication with force. Moreover, to facilitate the procedure and allow a free flow of medication to the bronchi.  Lastly, it is necessary to keep the head in an erect and vertical position.