Which inhaler valve is good? How to use an inhaler valve for babies?

As I said above, specialists always recommend a combination of an 50mcl inhaler valve and physiological saline for the best results. Along with that, parents also need to make sure to read the instructions for use carefully before starting to use this product on children.

preparing instruments:

• inhaler valve (you can choose 1 out of 5 products that I will mention below).
• physiological saline.
• cotton swab or soft paper.

Nasal suctioning for babies is carried out in detail through the following steps:

Step 1:  drip physiological saline

First, put your baby's head on a high pillow, lie on his side, and then slowly put 1-2 drops of nasal drops into the nose, trying to keep the liquid in the baby's nose for about 10 seconds. The purpose of this is to help thin out nasal mucus so that suctioning goes more smoothly.

Salt water bottles can be bought at the drugstore or can be made at home easily. brine is mixed with a ratio of 1/4 teaspoon of salt to about 240ml of water. You just mix it up once a day, then store it in a bottle and it's okie.

Step 2: suck the 50mcl inhaler valve

In this step, you will gently put one tip 50mcl inhaler valve into the baby's nose, with the other end; put it in your mouth to suck the mucus out. After suctioning, one side of the nose needs to be cleaned again to remove all the mucus from the lumen and then continue to aspirate with the other side. repeat operation as if sucked on the other side.

Note: Do not put the inhaler valve for babies too deeply because the mucosa inside the baby's nose is very weak and easily damaged. If the child has a protest against, do not rush to force the child to suck the mucus right away, but try again a little later to avoid in the process of doing it will hurt the nose area when the child moves.

Step 3: Dry 50mcl inhaler valve

The last step is after you have finished sucking the baby's nose, remember to use a cotton swab to clean and dry the baby's nose area.

b/ What is the best inhaler valve for babies?

A 50mcl inhaler valve will make it more convenient for parents to take care of their baby. Currently, on the market there are many products for you to choose from, with prices ranging from a few tens of thousands of dong to millions of dong. However, the most popular are still the following 3 types:

1. u-shaped inhaler valve

This line of inhaler valves will usually have a small end to put into the baby's nose. It comes with a bulb to hold the discharge and another end that is flat or straight. Moreover, mothers can use their mouth to create suction when cleaning the nose. for children.

Mothers just need to use their mouth to suck one end out. The other end, put it into the baby's nose, and the mother has sucked out all the mucus in the baby's nose. The price of this type is also relatively cheap, so it is preferred by many parents.

Advantages of 50mcl inhaler valve:

• affordable price.
• The u-shaped 50mcl inhaler valvecan be used many times and the mother can adjust the suction force to be strong or light.

defect:

• You will need to take more manual steps than with other infant inhaler valves.
• There is no guarantee of preventing illness such as colds, flu or other health problems from being passed from baby to mother.

General evaluation of the u-shaped inhaler valve:

It is designed for repeated use. You should not use this inhaler valve for too long. Depending on the material, you should use it appropriately and in case your baby does not have a runny or stuffy nose often. Moreover, you should only use it within 1-3 months to ensure safety and hygiene.

2. rubber bulb manual suction tool

If you are asking which 50mcl inhaler valve is good, simply this is the most classic type of device. It comes with a rubber ball shaped like a tube and bulb. High elasticity is the place to create suction and collect the fluid. After sucking the nose, the mother can squeeze it flat and a small tip to put it into the baby's nose.

Disadvantages 50mcl inhaler valve:

To use, put the tip of the rubber tube into the baby's nose and gently let go of the suction cup. After that, the parents should remove all the fluid from the suction bulb. And we should continue with the other nose. Note that the mother remembers to clean the suction cup for further use.

General evaluation of manual vacuum tube rubber bulb: in fact, these types of rubber bulb tubes are usually designed to be used a few times. This is also the reason why they are often used in hospitals. If you want to find an 50mcl inhaler valve for babies that can be used for a long time, I think you should not choose this type of straw.

3. modern design tools of 50mcl inhaler valve

The battery powered inhaler valve is the most modern and convenient type of inhaler valve that is easy to use. Of course, it comes with a rather high price that you will have to pay compared to other product lines.

Advantages:

• The machine is very convenient, easy to clean after use.
• Continuous suction without affecting the nasal mucosa of the child.
• This product can be used many times.

Cons:

• High price compared to other types.
• The suction force cannot be adjusted.

General assessment of battery-powered inhaler valves:

Which product lines are good for newborns? Modern designs have many different brands, so mothers need to find out information carefully before buying a device. Parents should consult in reputable places, avoid buying fake, fake and poor-quality goods.

Conclusion 50mcl inhaler valve

The weather changes erratically, making children easily sick and suffering from rhinitis and stuffy nose. Therefore, mothers should always equip their babies with the best and safest 50mcl inhaler valve products. It is to protect their baby's health. Hopefully through this article, mothers can easily choose for themselves a good and most suitable infant inhaler valve for their baby!